Corrosion Control Equipment

Corrosion Control Equipment

CorrReader Pro – Corrosion Control Equipment


  • Simple, easy use, designed for use by non-corrosion technicians
  • Internal GPS antenna for synchronization and location information
  • Continuous logging of DC and AC voltage, up to 24 hours
  • Data saved to SD card with GPS coordinates and date/time stamped
  • Programmable GPS time offset to operate in local time
  • Data stored in an ASCII comma delimited file, easily imported into any standard spreadsheet software
  • Self-diagnostic start up mode and function/error LED’s for easy visual reference
  • Ergonomic hand held design with no-slip grips
  • Waterproof 5 way binding posts for test leads
  • Comprehensive 2 year warranty


  • CorrReader Pro
  • Test leads with insulated alligator clips
  • Mini USB cable
  • Universal AC & 12V DC chargers
  • Cu/CuSO4 half cell
  • Carrying case
  • Operation manual

Technical Specification

  • Single channel, DC and AC: DC range of +/-10V at 0.1 mV precision with ≤1% accuracy AC range of 100V at 1 mV precision with ≤1% accuracy
  • Input impedance ≥ 20 MΩ
  • AC rejection at 50 Hz to 60 Hz ≥ 80db, 50 V RMS superimposed
  • Heavy duty impact resistant IP65 NEMA 4 case
  • Operator programmable interruption cycle and ON/OFF durations.
  • Operating temperature 5 to 55 degrees C
  • 16×4 LCD sunlight readable high contrast display
  • Membrane switch tactile keypad with 4 navigation keys, 1 enter key and power button
  • Waterproof external USB 2.0 interface
  • Long life 3.6V Li Ion battery recharged via USB
  • Fully integrated internal GPS
  • Micro SD card memory & data storage
  • USB 2.0 interface for data transfer
  • Dimensions: 12.5cm x 5cm x 19cm, 5” x 2” x 7.5”
  • Weight: 525 g, 1.2 lbs
  • Certifications: IP65 rated, IEC61010-1 8.3.2 drop test
Preliminary Discovery Form
Click to download service class